Monday, June 4, 2018

Monitor - slow but steady


A busy weekend for me and my Better Half, but I found some time to work on the monitor. The bulk of construction is now done and dusted. All that's left are the twiddly bits for the upper deck - smokestack, mast and skylight.

For the railings I use the plastic mesh found in craft shops. I think it's used for embroidery. It's cheap, easy to cut, and works well for modelling purposes. It is quite flexible and in my experience doesn't take ordinary acrylic paints well, so in this case I sprayed it with Krylon flat white which works nicely. Six lengths of mini-dowel make the posts. The only other addition to the deck house so far is to paint the conning tower vision slot black.


The railings are now glued on with E6000 adhesive, again because it works with this kind of plastic. The currently empty stretch of deck either side of the conning tower will mount navigation lights once I get around to casting them.


Bits to be sprayed white - The bamboo kebab skewer and mini-dowel mast, component parts of the skylight, and the smokestack. I lightly sanded the exterior of the smokestack to prep it for the spray paint, and painted the inside sooty black. The skylight is more plastic mesh, with wood filler spread across it to fill the square holes leaving the mesh surface proud.


Once the paint dried on the skylight, I painted the piece light blue to represent glass then went over the raised grid work with white for the window frames. Once dry I gave the glass a coat of gloss varnish I think it came out okay.


Next I'll rig the mast and glue a short length of tube to the stern railing on the upper deck to take an interchangeable flagpole. That way I can swap out the vessel's nationality when needed. At the moment I'm debating whether to make the whole deck house assembly removable for ease of storage/transport. I have a couple of small bar magnets left, or I can make a rectangular coffer for the deck house to sit over. We'll see.

3 comments:

Michael Awdry said...

It's the little touches like the rivets that are elevating this to a really impressive build - fabulous!

Martin said...

A fearsome engine of war that will, no doubt, strike terror into the hearts of all "wrong thinking folks"! All kidding aside, A.J., it's looking good!

A J said...

Thank you, gentlemen! It's on the home stretch now. I thought of dry brushing the hull to bring out a bit more detail, but it looks kind of sinister as-is, so I may leave it.

 

home page uniques
Fishing Rods